Jaringan Komputer: JARINGAN OSPF

Selasa, 17 Juni 2014

JARINGAN OSPF

Dari pembuatan jaringan ini kita terlebih dahulu mengatur dari PC Swich dan Router sedemikian rupa dan kita.... dalam menyambung jaringan dari setiap router adalah seperti ini.

Router0

Router#ena

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#router ospf 10

Router(config-router)#network 192.107.1.0 255.255.255.0 area 1

Router(config-router)#network 192.107.2.0 255.255.255.0 area 1

Router(config-router)#network 192.107.3.0 255.255.255.0 area 1

Router(config-router)#network 192.107.4.0 255.255.255.0 area 1

Router(config-router)#network 192.107.5.0 255.255.255.0 area 1

Router(config-router)#network 192.107.6.0 255.255.255.0 area 1

Router(config-router)#network 192.107.7.0 255.255.255.0 area 1

Router(config-router)#network 192.107.8.0 255.255.255.0 area 1

Router(config-router)#network 192.107.9.0 255.255.255.0 area 1

Router(config-router)#network 192.107.10.0 255.255.255.0 area 1

Router(config-router)#network 192.107.11.0 255.255.255.0 area 1

Router(config-router)#network 192.107.12.0 255.255.255.0 area 1

Router(config-router)#network 192.107.13.0 255.255.255.0 area 1

Router(config-router)#end

Router#

%SYS-5-CONFIG_I: Configured from console by console

01:11:38: %OSPF-5-ADJCHG: Process 10, Nbr 192.107.10.1 on FastEthernet1/0 from LOADING to FULL, Loading Done

router1

Router#ena

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#router ospf 10

Router(config-router)#network 192.107.1.0 255.255.255.0 area 1

Router(config-router)#network 192.107.2.0 255.255.255.0 area 1

Router(config-router)#network 192.107.3.0 255.255.255.0 area 1

Router(config-router)#network 192.107.4.0 255.255.255.0 area 1

Router(config-router)#network 192.107.5.0 255.255.255.0 area 1

Router(config-router)#network 192.107.6.0 255.255.255.0 area 1

Router(config-router)#network 192.107.7.0 255.255.255.0 area 1

Router(config-router)#network 192.107.8.0 255.255.255.0 area 1

Router(config-router)#network 192.107.9.0 255.255.255.0 area 1

Router(config-router)#network 192.107.9.0 255.255.255.0 area 1

01:10:58: %OSPF-5-ADJCHG: Process 10, Nbr 192.107.8.1 on FastEthernet1/0 from LOADING to FULL, Loading Done

Router(config-router)#network 192.107.10.0 255.255.255.0 area 1

Router(config-router)#network 192.107.11.0 255.255.255.0 area 1

Router(config-router)#network 192.107.12.0 255.255.255.0 area 1

Router(config-router)#network 192.107.13.0 255.255.255.0 area 1

Router(config-router)#end

Router#

%SYS-5-CONFIG_I: Configured from console by console

01:22:58: %OSPF-5-ADJCHG: Process 10, Nbr 192.107.13.1 on FastEthernet3/0 from LOADING to FULL, Loading Done

router2

Router>enable

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#interface FastEthernet1/0

Router(config-if)#exit

Router(config)#exit

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#ena

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#router ospf 10

Router(config-router)#network 192.107.1.0 255.255.255.0 area 1

Router(config-router)#network 192.107.2.0 255.255.255.0 area 1

Router(config-router)#network 192.107.3.0 255.255.255.0 area 1

Router(config-router)#network 192.107.4.0 255.255.255.0 area 1

Router(config-router)#network 192.107.5.0 255.255.255.0 area 1

Router(config-router)#network 192.107.6.0 255.255.255.0 area 1

Router(config-router)#network 192.107.7.0 255.255.255.0 area 1

Router(config-router)#network 192.107.8.0 255.255.255.0 area 1

Router(config-router)#network 192.107.9.0 255.255.255.0 area 1

Router(config-router)#network 192.107.10.0 255.255.255.0 area 1

Router(config-router)#network 192.107.12.0 255.255.255.0 area 1

01:11:07: %OSPF-5-ADJCHG: Process 10, Nbr 192.107.10.1 on FastEthernet1/0 from LOADING to FULL, Loading Done

Router(config-router)#network 192.107.11.0 255.255.255.0 area 1

Router(config-router)#network 192.107.13.0 255.255.255.0 area 1

Router(config-router)#end

Router#

%SYS-5-CONFIG_I: Configured from console by console

router3

Router>ena

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#router ospf 10

Router(config-router)#network 192.107.1.0 255.255.255.0 area 1

Router(config-router)#network 192.107.2.0 255.255.255.0 area 1

Router(config-router)#network 192.107.3.0 255.255.255.0 area 1

Router(config-router)#network 192.107.4.0 255.255.255.0 area 1

Router(config-router)#network 192.107.5.0 255.255.255.0 area 1

Router(config-router)#network 192.107.6.0 255.255.255.0 area 1

Router(config-router)#network 192.107.7.0 255.255.255.0 area 1

Router(config-router)#network 192.107.8.0 255.255.255.0 area 1

Router(config-router)#network 192.107.9.0 255.255.255.0 area 1

Router(config-router)#network 192.107.10.0 255.255.255.0 area 1

Router(config-router)#network 192.107.11.0 255.255.255.0 area 1

Router(config-router)#network 192.107.12.0 255.255.255.0 area 1

Router(config-router)#network 192.107.13.0 255.255.255.0 area 1

Router(config-router)#end

Router#

01:44:48: %OSPF-6-AREACHG: 192.107.13.0 changed from area 2 to area 1

01:44:52: %OSPF-5-ADJCHG: Process 10, Nbr 192.107.13.2 on FastEthernet2/0 from LOADING to FULL, Loading Done

router4

Router>ena

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#router ospf 10

Router(config-router)#network 192.107.1.0 255.255.255.0 area 1

Router(config-router)#network 192.107.2.0 255.255.255.0 area 1

Router(config-router)#network 192.107.3.0 255.255.255.0 area 1

Router(config-router)#network 192.107.4.0 255.255.255.0 area 1

Router(config-router)#network 192.107.5.0 255.255.255.0 area 1

Router(config-router)#network 192.107.6.0 255.255.255.0 area 1

Router(config-router)#network 192.107.7.0 255.255.255.0 area 1

Router(config-router)#network 192.107.8.0 255.255.255.0 area 1

Router(config-router)#network 192.107.9.0 255.255.255.0 area 1

Router(config-router)#network 192.107.10.0 255.255.255.0 area 1

Router(config-router)#network 192.107.11.0 255.255.255.0 area 1

Router(config-router)#network 192.107.12.0 255.255.255.0 area 1

Router(config-router)#network 192.107.13.0 255.255.255.0 area 1

Router(config-router)#end

Router#

%SYS-5-CONFIG_I: Configured from console by console

01:45:33: %OSPF-5-ADJCHG: Process 10, Nbr 192.107.13.1 on FastEthernet1/0 from LOADING to FULL, Loading Done

router5

Router>ena

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#router ospf 10

Router(config-router)#network 192.107.1.0 255.255.255.0 area 1

Router(config-router)#network 192.107.2.0 255.255.255.0 area 1

Router(config-router)#network 192.107.3.0 255.255.255.0 area 1

Router(config-router)#network 192.107.4.0 255.255.255.0 area 1

Router(config-router)#network 192.107.5.0 255.255.255.0 area 1

Router(config-router)#network 192.107.6.0 255.255.255.0 area 1

Router(config-router)#network 192.107.7.0 255.255.255.0 area 1

Router(config-router)#network 192.107.8.0 255.255.255.0 area 1

Router(config-router)#network 192.107.9.0 255.255.255.0 area 1

Router(config-router)#network 192.107.10.0 255.255.255.0 area 1

Router(config-router)#network 192.107.11.0 255.255.255.0 area 1

Router(config-router)#network 192.107.12.0 255.255.255.0 area 1

Router(config-router)#network 192.107.13.0 255.255.255.0 area 1

Router(config-router)#end

Router#

%SYS-5-CONFIG_I: Configured from console by console

01:45:33: %OSPF-5-ADJCHG: Process 10, Nbr 192.107.13.1 on FastEthernet1/0 from LOADING to FULL, Loading Done

router6

Router>ena

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#router ospf 10

Router(config-router)#network 192.107.1.0 255.255.255.0 area 1

Router(config-router)#network 192.107.2.0 255.255.255.0 area 1

Router(config-router)#network 192.107.3.0 255.255.255.0 area 1

Router(config-router)#network 192.107.4.0 255.255.255.0 area 1

Router(config-router)#network 192.107.5.0 255.255.255.0 area 1

Router(config-router)#network 192.107.6.0 255.255.255.0 area 1

Router(config-router)#network 192.107.7.0 255.255.255.0 area 1

Router(config-router)#network 192.107.8.0 255.255.255.0 area 1

Router(config-router)#network 192.107.9.0 255.255.255.0 area 1

Router(config-router)#network 192.107.10.0 255.255.255.0 area 1

Router(config-router)#network 192.107.11.0 255.255.255.0 area 1

Router(config-router)#network 192.107.12.0 255.255.255.0 area 1

Router(config-router)#network 192.107.13.0 255.255.255.0 area 1

01:34:04: %OSPF-5-ADJCHG: Process 10, Nbr 192.107.12.1 on FastEthernet1/0 from LOADING to FULL, Loading Done

Router(config-router)#network 192.107.13.0 255.255.255.0 area 1

Router(config-router)#end

Router#

%SYS-5-CONFIG_I: Configured from console by console

disini adalah pengalamatan dari setiap router dan IP. ini di ambil dari setiap kompuer dan Router semoga bermanfaat terimasih

Tidak ada komentar:

Posting Komentar

Langganan: Posting Komentar (Atom)